Nordic NRF52840 Dongle: Nordic Semiconductor offers a fast solution for the users with a special dongle for nRF52840 product, which is one of the flagship products in Bluetooth field.

With this dongle, the product is connected directly with the nRF Connect tool provided by the Nordic company and allows the user to develop code.

• nRF52840 SoC (System On Chip)
• Bluetooth 5 / Bluetooth Mesh / Thread / ZigBee / 2.4GHz / Ant
• Can be programmed via USB
• Can be connected via the nRF Connect Desktop application
• RGB LED that can be programmed by the user
• User-programmable Button

Nordic NRF52840 Dongle yazısı ilk önce Component By Özdisan üzerinde ortaya çıktı.

Nordic NRF52840 DK: The development kit based on the nRF52840 chip developed by the Nordic Semiconductor company offers great convenience to users. With Programming and Debugging features, it allows the user to remove any issues during code development. Its design, compatible with Arduino pins, supports an external component designed for Arduino. Although it’s equipped with an NFC connector, it can be used as a development kit in NFC projects. 

• nRF52840 SoC (System On Chip)
• Bluetooth 5/Bluetooth Mesh/Thread/ZigBee/2.4GHz/Ant
• Can be programmed via USB
• Can be debugged via USB
• Can be connected via the nRF Connect Desktop application
• 4 RGB LEDs that can be programmed by the user
• 4 Buttons that can be programmed by the user
• NFC support
• Arduino pin compatibility
• Built-in Segger programmer feature 

Nordic NRF52840 DK yazısı ilk önce Component By Özdisan üzerinde ortaya çıktı.

The Seeed Studio BeagleBone Green Wireless Development Board is the first Wi-Fi+Bluetooth Low Energy (BLE) board in the Beagle family that is based on TI AM335X. It offers Wi-Fi and BLE solution with built-in 2.4GHz TI WLinkTM8 module with two antennas.

Features of Seeedstudio BeagleBone Green Wireless (Wi-Fi+Bluetooth)

• AM3358 1GHz ARM® Cortex-A8 
• 512MB DDR3 RAM
• 4GB 8-bit eMMC internal storage unit
• 3D graphics accelerator
• NEON-dot digit accelerator
• 2x Programmable real-time units (32-bit microprocessor)
• USB can be used as a communication and power source
• 4x USB2.0 host support
• Wi-Fi 802.11b/g/n 2.4GHz and Bluetooth 4.1 LE support
• 2x 46 connector
• 2x Grove sensor connector

Seeedstudio BeagleBone Green Wireless (Wi-Fi + Bluetooth) yazısı ilk önce Component By Özdisan üzerinde ortaya çıktı.

Seeeduino RHF76-052AM Dev Board W/GPS is an Arduino development board with embedded long-range protocol and GPS function, where you can quickly start to experience the long-range advantage in the IoT field.

Based on the RHF76-052AM communication module, the Seeeduino RHF76-052AM Development Board is compatible with Long-Range Class A/C and supports various communication frequencies. 4 built-in standard groove connectors allow SeeeduinoRHF76-052AM Dev Board to be conveniently connected to hundreds of groove sensors and actuators for Seeeduino. This allows users to focus more on the application itself without worrying about the compatibility between different modules.

Features

• Microprocessor: ATSAMD21G18, 
• 32-Bit ARM Cortex M0+ processor
• Operating voltage: 3.3V
• Number of digital I/Os: 20
• Number of PWMs: 2
• UART: 2
• Number of analog inputs: 6-channel 12-bit ADC
• Number of analog outputs: 1-channel 10-bit DAC
• External interruption: All pins but pin no. 4
• The current it can supply per pin: 7mA
• Flash Memory: 256KB
• SRAM: 32KB
• EEPROM: None
• Crystal Speed: 48 MHz, LoRaWAN Class A/C GPS communication
• The bands it uses: Dual band: 434/470MHz and 868/915MHz

Seeeduino LoraWAN W/GPS yazısı ilk önce Component By Özdisan üzerinde ortaya çıktı.

Features

• AM3358 1GHz ARM® Cortex-A8
• 512MB DDR3 RAM
• 4GB 8-bit eMMC internal storage unit
• 3D graphics accelerator
• NEON-dot digit accelerator
• 2x Programmable real-time unit (32-bit microprocessor)
• USB can be used as a communication and power source
• 1x USB host support
• Ethernet support
• 2x 46 connector
• 2x Grove sensor connector

Seeedstudio BeagleBone Green yazısı ilk önce Component By Özdisan üzerinde ortaya çıktı.

Specifications

• Wi-Fi 802.11 b/g/n support
• Pin-out for GPIO, I2C, I2S, SPI, UART, PWM and Ethernet Port
• External pin expansion for Ethernet, PWM, GPIO, I2C, SPI, UART, I2C use
• 580 MHz MIPS CPU
• 32 MB flash and 128 MB DDR2 RAM
• USB host support
• Micro SD slot 

Seeeduino Linkit Smart yazısı ilk önce Component By Özdisan üzerinde ortaya çıktı.

Features

• Arduino Yun equivalent product
• Dragino Wi-Fi module-based IoT card
• Open source OpenWRT support
• 2.4Ghz Wi-Fi, 802.11b/g/n support
• Ethernet support
• USB 2.0 support
• Dimensions: 75.10 mm x 53.39 mm x 11.50 mm
• Operating temperature: -20~60°C
• Color: Red

Seeeduino Cloud yazısı ilk önce Component By Özdisan üzerinde ortaya çıktı.

Specifications

• nRF52840 SoC (System On Chip)
• Bluetooth 5 / Bluetooth Mesh / Thread / ZigBee / 2.4GHz / Ant
• Can be programmed via USB
• Can be debugged via USB
• Can be connected via the nRF Connect Desktop application
• 4 RGB LEDs that can be programmed by the user
• 4 Buttons that can be programmed by the user
• NFC support
• Arduino pin compatibility
• Built-in Segger programmer feature

Nordic nRF 52840 DK yazısı ilk önce Component By Özdisan üzerinde ortaya çıktı.

This development kit allows the user to test the capabilities of the Npm1100 PMICs with existing applications without having to create any hardware. This kit offers battery charging and power supply for applications, with internal connectors and connection elements. It can be used as an external DC power supply with the USB power supply feature included in the kit and the connector pins included.

• Current support between 20mA – 400mA,
• Constant current or voltage supply,
• Operation compliant with nrf52 and nrf53 series,
• Battery temperature protection feature,
• Ability to be used as an external DC power supply,
• Ability to charge a battery.

Nordic nPM1100-EK yazısı ilk önce Component By Özdisan üzerinde ortaya çıktı.

It offers 2 modes, as “ammeter” mode and “power supply” mode. With the power supply mode, you can both supply power to your device and measure its power consumption. Logic analysis can be performed with 8 input pins.

Specifications

• Current measurement range from 200nA to 1A
• 100nA to 1mA resolution depending on the measuring range
• Logic analyzer support with 8 digital inputs
• 100 ksps sampling rate
• 0.8 – 5 V adjustable voltage value
• Inspection and control with the nRF Connect Desktop application

Power Profiler KİT II yazısı ilk önce Component By Özdisan üzerinde ortaya çıktı.